Flush Mercury Outboard Motor
Change the way you flush your outboard boat motors with FLUSHMASTER!
FlushMaster
How Does it Work?
The Flush Mercury Outboard Motor is a true "plug and play" device. After installation, the customer will simply press ON and then START to begin the flushing process. After pressing start, the device will send water out of the first outlet for your set amount of time (pre programmed for 15 minutes), and then switch to the second outlet, and so on. When the device has completed flushing all outboards, a completion sound will be audible, and the device will shut off blocking the flow of water. There is no need to return to the device, disconnect hoses, or shut the water off until your next boating adventure!
Connect Device to Water Source
Attach Outlet Hoses to Motors
Turn Device on then press start
FlushMaster
HOW MANY OUTBOARD MOTORS DOES YOUR BOAT HAVE?
2-OUTLET (For Single and Dual)
4-OUTLET (For Triple and Quad)
Why Flush Mercury Outboard Motor?
When you pull your boat into your dock, slip, or driveway- Simply connect your outlet hoses, rinse your boat, press START on the FLUSHMASTER, and walk away. Let the mule do the work for you!
Save Time
Boaters can save time by simplifying the flushing process. Press Start and Walk away until the next time you use the boat.
Create Opportunity
Many boaters have families or obligations when they return to the dock. Avoid having to wait while your motors flush!
Ensure Proper Maintenance
As spelled out in every outboard's owner manual, you must flush your outboard motors after every use in saltwater. Might as well make that process a lot easier!
Designed For Harsh Salt Environments
Flushmaster is made from materials designed for harsh salt environments and meant to be left outside in any condition.
FlushMaster
Extend Your Outboard Motors' Service Life
Many boaters often forget, or altogether skip flushing their outboard motors simply because the process requires too much time and effort; especially with multiple engines. This then results in poor motor maintenance and a shortened lifespan. With our Flush Mercury Outboard Motor device, it makes the process so much easier and convenient, that boat owners are more inclined to flush their outboard motors after every use.
In Just 4 Easy Steps
Connect to Water Source
Connect your Flushmaster directly to a spigot or water hose. Using a spigot or reinforced hose allows you to leave the water on 100% of the time.
Connect to Boat Motors
Using a quick connect or the standard flush hose fittings, connect your outlet hoses to your outboard motors.
Press ON, Press START
Once the hoses are connected, simply press "ON", and then press "START". All devices come pre-programmed for 15 minutes per outlet.
Walk Away
The Flushmaster will flush each motor one at a time. Upon completion, the device will shut off and block the flow of water.
FlushMaster
Cut Down Flushing Time Drastically
Flushing outboard motors is a time-consuming process, especially with multiple motors. You must connect the hose to the first motor, turn on the water, wait 15 minutes, turn the water off, disconnect your hose, and so on for each additional motor. Using Flush Mercury Outboard Motor helps you drastically cut down on the time you spend on this maintenance routine since you can now flush multiple outboard motors individually with just the push of a button.
What length Hoses do i need?
Selecting the right hose length is an important decision. With too short of hoses, the device may not reach for your application. Too long of hoses, and you have more hassle than needed. All Flush Mercury Outboard Motor's come with 3 FT hoses as standard, with longer hoses available to meet each customer's application. 3 FT hoses are the recommended length if you will be connecting to a hose and placing the device in the transom of your boat. Longer hoses are meant for fixed mount applications, for example when the device is connected directly to a spigot nearest to your boat. Furthermore, depending on the beam of your boat, longer hoses may be necessary. Look at the applications below to see what hose length best fits your setup.
How will I mount my Flush Mercury Outboard Motor?
Connected directly to water spigot
Mounted to a Piling
Placed in the transom
Take a look at the recommended applications to determine how you want to use your Flush Mercury Outboard Motor. We recommend connecting directly to a water spigot and leaving the water on 100% of the time. Once you have chosen your preferred application, measure the distance from the device to your motors. Hose lengths available are 3 FT, 5FT, 7 FT, 9 FT, and 12 FT. Need help with your application or custom hoses, call us!
Each Flush Mercury Outboard Motor can SAVE thousands of gallons of water
A plug-and-play device used to simplify the process of flushing your outboard motors while saving time, money, and ensuring proper maintenance.