Using Flushmaster helps you drastically cut down on the time you spend on this maintenance routine since you can now flush multiple outboard motors individually with just the push of a button.
3-ft hoses are the recommended length if you will be connecting to a hose and placing the device in the transom of your boat.
Longer hoses are meant for fixed mount applications, for example when the device is connected directly to a spigot nearest to your boat. Furthermore, depending on the beam of your boat, longer hoses may be necessary.
Look at the applications below to see what hose length best fits your setup:
When you pull your boat into your dock, slip, or driveway, simply connect your outlet hoses, rinse your boat, press START on the FLUSHMASTER, and walk away.
After installation, the customer will simply press ON, and then START to begin the flushing process. After pressing start, the device will send water out of the first outlet for your set amount of time (pre programmed for 15 minutes), and then switch to the second outlet, and so on.
When the device has completed flushing all outboards, a completion sound will be audible, and the device will shut off blocking the flow of water. There is no need to return to the device, disconnect hoses, or shut the water off until your next boating adventure!
Many boaters often forget, or altogether skip flushing their outboard motors simply because the process requires too much time and effort; especially with multiple engines.
This then results in poor motor maintenance and a shortened lifespan. With our outboard flushing device, it makes the process so much easier and convenient, that boat owners are more inclined to flush their outboard motors after every use.